Beginner's Guide to Installing a New Shower Unit

Beginner's Guide to Installing a New Shower Unit

Blog Article

Schedule Free Estimate

Are you currently searching for tips concerning How to Install a Direct-to-Stud Shower Enclosure?

An effective shower setup needs mindful preparation and a lot of work. For the most part, you will certainly need to do three types of tasks: mounting wall surfaces, setting up the plumbing, as well as finishing wall surfaces.

Various Sorts Of Shower Units

Push-on Mixer: The tube as well as spray parts of the push-on mixer shower unit can be connected to the bathroom tap based on your need, as well as the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also very easy to mount. Nevertheless, although the tube connection is straightforward, it is quickly dislodged. In addition, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this type of shower are integrated with a bathroom mixer tap, as well as the temperature level can be adjusted with the bathroom faucets. It is a very affordable option and no extra plumbing is included. Nonetheless, the bath/shower mixers additionally suffer from bothersome temperature control choices.

Manual Mixer: The tube and spray of a hands-on mixer shower system belong of the wall surface unit and the cold and hot water supplies are linked to a solitary valve The temperature as well as pressure of the water are managed with either one or a selection of handles (in a lot more pricey showers). Although temperature level control is much easier in hand-operated mixer types, they are more expensive than the formerly mentioned mixers. They additionally need added plumbing of cold and hot water pipes.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall unit as well as the cold and hot water materials are attached to a single shutoff right here too. It is total with a built-in stabiliser to self-adjust the water temperature as well as to prevent it from becoming also hot. One of the greatest advantages of a thermostatic mixer shower type includes hassle-free temperature control. However, it is one of the most expensive of the various mixer options.

Power Shower: A power shower is a solitary device having an effective electric pump that is capable of changing both the water stress and also temperature level. This kind of shower can be fitted if there is water supply from a cold water cistern and also a hot water cylinder. A power shower makes the adjustment of both stress and temperature easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is essential to note that for this shower type to be installed, the keys stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature and pressure to be readjusted using a handle. Versions with temperature level stabilisers are much better as they stay untouched by other taps somewhere else being used within the family. A significant disadvantage of electric showers is that the control knob only permits the alternative of heats at much less stress, or lower temperature levels at a better pressure. This is problematic in the winter season when the spray is often weak and also the keys water is cooler. However, this problem is taken on in some versions which are readily available with a winter/summer setup.

The Majority Of Usual Blunders

Breaching or ignoring neighborhood code restrictions.

Using pipes that are also tiny.

Attaching copper to galvanized without using a brass or dielectric fitting in between both.

Not using tape or pipeline substance at threaded joints.

Not leveling your components when installing them.

Not setting up an air space filling for components.

Reducing supply stub outs as well short to install the shutoff valves onto after the completed wall surface is in location.

Not effectively straightening tubes right into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly cause a leak.).

When transforming the water back on in your house, always run the outside pipe shutoff or flush your toilets to bleed dust and also air from the lines. This debris can cause troubles in your sink taps and other plumbing trim.

Prep work.

To start with, you must select the type of shower that you want to install. It is essential to establish whether the picked shower is capable of handling certain systems and also can control a safe degree of water through the central heating boiler. The majority of shower systems nowadays are developed to be adaptable to various water stress (such as kept hot water and cold mains).
It is likewise important to consider the water pressure and the planning of the piping as well as drainage for the shower.

Approach.

Depending on the type of shower you want to set up, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
Prior to starting, it is a good idea to note the placements of the shower head and control, and to plan the pipe-work involved. In addition, the water drainage system to remove the waste water will need to be intended. Both placements of the wire course as well as the shower switch will likewise need to be taken into consideration if an instant or electric shower system is being mounted.
Use the instruction guide supplied with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is important to cut off the water supply. In order to secure the pipelines, they need to be offered a water resistant covering as well as also fitted with separating shutoffs. The pipes can then be buried into the wall surface and plastered over to neaten the total look.
Fit the base tray, shower head, and fittings.
Connect the major shower control to the pipelines that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the water system as well as examination the pipelines for any type of leaks, as some may need tightening up.
If you are setting up an electrical shower, remember to turn off the electricity supply prior to making any electric connections. Once these links have actually been made (there ought to be guidance within the user's manual), the power supply can be switched back on.

Adjusting Water Stress to Suit Your Shower.

The cold water reservoir can be raised to a greater elevation (in some cases just 150mm (6inches)) by fitting a solid wooden support under it - possibly made up of struts as well as blockboards. If you pick this option, the primary and also circulation pipes will certainly likewise need to be elevated to meet the new height of the reservoir.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it must be attached into the power supply in order to run.

Piping and also Drain.

It is best to make use of 15mm size supply pipes, and also make the go to the shower as short and straight as possible so regarding maintain optimal pressure and also minimise heat loss. Additionally, by minimising making use of joints for pipe edges, you can lower the resistance in the circulation of the supply of water. You can attain this by bending the pipelines instead.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

I was guided to that article on How to Build a Shower Enclosure for Your DIY Bathroom from a good friend on another web address. Appreciated our blog? Please share it. Let others locate it. Many thanks for your time invested reading it.

Call Today

Report this page